Skip to main content
Version: 2.0.19

Quick Start

Before you begin, ensure you have Installed the SkyPath iOS SDK.

1. Import SkyPathSDK

Near the top of any Swift file that uses SkyPathSDK, add the following import statement:

import SkyPathSDK

2. Set Delegate

Set your SkyPathDelegate object. All methods will be called on the main thread.

SkyPath.shared.delegate = delegate

Implement the SkyPathDelegate protocol required methods.

extension Controller: SkyPathDelegate {

func didUpdateRecordingStatus(to recording: Bool) {

print("SkyPath did \(recording ? "start" : "stop") recording")

func didReceiveNewTurbulenceData() {

print("SkyPath did receive new turbulence data")

// Query turbulence using `TurbulenceQuery` and show on the map
// See "Get Turbulence" step of this guide

func didChangeDevicePosition(_ inPosition: Bool, horizontal: Bool) {

print("SkyPath device is \(inPosition ? "" : "not ")in position and \(horizontal ? "" : "not ")horizontal")

// Turbulence data is not tracked when device in not in position or is horizontal.
// Show a notice here to properly position the device in the cradle.

These are required to implement the methods of the delegate and are enough for a quick start. You can get more details in the corresponding documentation sections.

3. Start SDK

Start SDK. It will not track and provide data until started.

SkyPath.shared.start(apiKey: "API_KEY", airline: "ICAO", userId: "ID", env: .dev(serverUrl: nil)) { error in
if let error = error {
  • API_KEY Please contact us at Start a trial with SkyPath.
  • ICAO is a company ICAO code registered in SkyPath system.
  • ID is any user identifier unique per company. Does not need to be registered in the SkyPath system.
  • .dev(serverUrl: nil) is set to use a default SkyPath development server

The completion block will be called asynchronously on the main thread. error will have details in case SDK can't start. If all is good SkyPathDelegate.didUpdateRecordingStatus(to:) will be called with recording: true.

4. Setup Aircraft

The turbulence severity level can be different for different aircraft types.

Set a current a/c type using supported types from the SDK after it started.

if let aircraft = SkyPath.shared.aircraft(byId: "B737") {
SkyPath.shared.aircraft = aircraft

5. Set Route Corridor

After SDK started and the aircraft was set, set a route corridor to get data in.

It should be a valid GeoJSON Polygon RFC 7946. See Data for more details.

Use the following for a quick test.

// KJFK-KIAD as [lng, lat]
let corridor = [(-76.76, 37.43), (-72.55,39.50), (-72.21,40.06), (-72.26,41.33), (-72.64,41.86), (-73.51,42.28), (-74.16,42.26), (-78.15,40.46), (-79.10,39.20), (-78.80,37.96), (-77.72,37.30), (-76.76,37.43)]
.map { CLLocationCoordinate2D(latitude: $0.1, longitude: $0.0) }

SkyPath.shared.dataQuery.polygon = corridor

6. Get Turbulence

SDK fetches data from the server and caches it locally automatically.

Use TurbulenceQuery to get filtered data as a GeoJSON string or as an array of objects. It will query locally cached data received previously. It blocks the current thread, so using a separate background thread is recommended.

do {
let result = try SkyPath.shared.turbulence(with: TurbulenceQuery()).get()
let geoJSON = result.geoJSON
// Show GeoJSON on the map
} catch {

7. Set Flight

To track data, flight info is required. You can still get turbulence data without setting it.

let flight = Flight(dep: "ICAO", dest: "ICAO", fnum: "FLIGHT_NUMBER")
  • ICAO is the airport's ICAO code.
  • FLIGHT_NUMBER is a combination of the airline's ICAO code and 1-4 digit number. When there is no such number, use ORIG-DEST-GUID, where ORIG is the ICAO code of the departure airport, DEST is the ICAO code of the destination airport and GUID is a globally unique identifier.

To stop tracking data, typically when a flight is ended, remove the flight.


8. Whitelisting

By default, SDK will access domain. This should be whitelisted, so SDK can receive and send data. When a domain is not whitelisted it will work as when offline.

You can use a proxy server to avoid whitelisting a SkyPath domain. It should forward all HTTPS network traffic for with a wildcard * for a path. describes APIs to get data only as it's not possible to send recorded data outside of SDK. SDK will use other not documented API endpoints, so whitelisting only those or any other fixed endpoints paths list is not sufficient.

9. Test

After completing the above steps run the project and see if the data is provided correctly. You should see some turbulence data. See Test for how to test recording.